代码:
sudo sensors
coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +22.0°C (high = +85.0°C, crit = +105.0°C)
Core 0: +14.0°C (high = +85.0°C, crit = +105.0°C)
Core 1: +21.0°C (high = +85.0°C, crit = +105.0°C)
f71868a-isa-0290
Adapter: ISA adapter
+3.3V: 3.33 V
in1: 776.00 mV
in2: 32.00 mV
in3: 944.00 mV
in4: 1.11 V
in5: 744.00 mV
in6: 1.03 V
3VSB: 3.33 V
Vbat: 3.23 V
5VSB: 4.92 V
fan1: 1025 RPM
fan2: 0 RPM ALARM
fan3: 0 RPM ALARM
temp1: FAULT (high = +85.0°C, hyst = +81.0°C)
(crit = +100.0°C, hyst = +96.0°C) sensor = transistor
temp2: +20.0°C (high = +85.0°C, hyst = +81.0°C)
(crit = +100.0°C, hyst = +96.0°C) sensor = thermistor
temp3: +15.0°C (high = +70.0°C, hyst = +68.0°C)
(crit = +85.0°C, hyst = +83.0°C) sensor = transistor
用coreboot能获取到f71868a的数据。
内核里的源码似乎是能够读取superio的数据。
有用吗?
由于能引导cbmem就能捕获数据。
日志可以看到了。
代码:
[color=#000000]*** Pre-CBMEM romstage console overflowed, log truncated! *** [/color]
32- 67
[DEBUG] tx_dq: 0, 0, 2: 38- 60- 83, 43- 78
[DEBUG] tx_dq: 0, 0, 2: 44- 67- 90, 49- 85
[DEBUG] tx_dq: 0, 1, 2: 11- 34- 57, 16- 52
[DEBUG] tx_dq: 0, 1, 2: 35- 57- 80, 40- 75
[DEBUG] tx_dq: 0, 1, 2: 54- 75- 97, 59- 92
[DEBUG] tx_dq: 0, 1, 2: 62- 84- 107, 67- 102
[DEBUG] tx_dq: 0, 1, 2: 18- 41- 65, 23- 60
[DEBUG] tx_dq: 0, 1, 2: 29- 51- 74, 34- 69
[DEBUG] tx_dq: 0, 1, 2: 43- 65- 88, 48- 83
[DEBUG] tx_dq: 0, 1, 2: 51- 73- 95, 56- 90
内存初始化阶段看不见。
现在有两个方向,一个是老外说的LPC串口。(B75就没这玩意。)
另外一个是EHCI debug dongle。
前者不知道细节。
后者,我的RK3399开发板现在好像还能不能用Type-c口。