(02-11-2023, 01:08 PM)vimacs 提到: native raminit 你需要问一下它的作者,他应该是社区最熟悉 Haswell 平台的人了。Ivy Bridge的支持会更好吧?
ECC 的支持需要主板同时实现,因为 ECC 需要板子上引出做数据纠错的线路,普通主板应该没有。
https://review.coreboot.org/q/topic:haswell-nri
native raminit能用吗?
微码也不用吧?
说是按照平台自动生成。
PS:我的猜测是正确的,mb_get_spd_map配置没有问题。
就是mrc.bin的内存兼容性太差了。
1600Mhz 8G的条子不能启动。
太垃圾了。
换了其他的内存。
1333Mhz和1600Mhz的4G条子就能启动。
太垃圾了。
我也没有其他的8G内存。
只能等4代的原生内存控制器搞好了再接着调试了。
先移植B75好了。
看看原生内存控制器能不能兼容这内存条。
代码:
sudo inxi -m
Memory:
RAM: total: 15.58 GiB used: 1.26 GiB (8.1%)
Array-1: capacity: 32 GiB slots: 4 EC: None
Device-1: Channel-0-DIMM-0 type: DDR3 size: 4 GiB speed: 2666 MT/s
Device-2: Channel-0-DIMM-1 type: DDR3 size: 4 GiB speed: 2666 MT/s
Device-3: Channel-1-DIMM-0 type: DDR3 size: 4 GiB speed: 2666 MT/s
Device-4: Channel-1-DIMM-1 type: DDR3 size: 4 GiB speed: 2666 MT/s
代码:
sudo inxi -m
Memory:
RAM: total: 11.64 GiB used: 1.12 GiB (9.6%)
Array-1: capacity: 32 GiB slots: 4 EC: None
Device-1: Channel-0-DIMM-0 type: DDR3 size: 4 GiB speed: 3200 MT/s
Device-2: Channel-0-DIMM-1 type: DDR3 size: 4 GiB speed: 3200 MT/s
Device-3: Channel-1-DIMM-0 type: DDR3 size: 4 GiB speed: 3200 MT/s